Scissor Lift Service in Orland Park, IL | Win Win Equipment
Scissor Lift Service Orland Park: Same-day pickup from Orland Park · 45 minutes from our Addison shop · Repairs $150/hr · Annual ANSI inspection $225
We repair and inspect lifts from all major brands, including Genie and Skyjack and JLG, serviced and inspected in our Addison, IL shop.
Win Win Equipment services scissor lifts in Orland Park, IL from our shop in Addison — 45 minutes away. When a lift goes down at a LaGrange Road retail buildout or an Orland Square-area facility, we come get it: same-day pickup and diagnosis, straightforward fixes back the next day, complex jobs quoted with an honest timeline first. Genie, Skyjack, and JLG — call 773-790-7299.
Scissor Lift Service Orland Park: Local scissor lift service, about 28 miles away
We’re about 28 miles from Orland Park in Addison — close enough for reliable pickup and return without the drive-time surcharge a shop across the metro adds on. We pick up from warehouses, contractors, and facility crews across Orland Square Mall, the LaGrange Road retail corridor, and the big-box and commercial buildouts along 159th Street. As a family-owned shop — not a national rental chain — an outside machine you didn’t buy or rent from us doesn’t go to the back of the line. It gets fixed right, priced fair, and returned quickly.
Scissor lift models we service
Genie: GS-1930, GS-2632, GS-3246, GS-4047, GR-20 and the rest of the GS line. Skyjack: SJIII3219, SJIII3226, SJIII4632, SJIII4740. Plus JLG slab scissors. Full lineup on our service hub.
Annual ANSI inspection in Orland Park
Every lift in service needs its annual ANSI/OSHA inspection within 13 months of the last one. We inspect Orland Park machines for $225 in our Addison shop or $350 on-site, same-day certificate when pre-scheduled, and we log your renewal date so it never lapses. Multiple lifts at one site? Ask about a multi-unit inspection day.
Repair & battery service
Repairs run $150/hr plus parts, quoted after same-day diagnosis and approved by you first. The common calls: dead battery packs (we install Crown deep-cycle batteries and set the charge profile), hydraulic leaks and drift, chargers, joysticks, and control boxes. Machine stuck up or blocking a dock? On-site help is available when pickup isn’t practical.
Lift down in Orland Park? Same-day pickup.
Call 773-790-7299 or request service.
When to call for scissor lift service in Orland Park
Most scissor lift problems give warning signs before the machine stops working. Book a service visit if you notice any of these:
- The platform lifts slower than it used to, or stalls near full height.
- Hydraulic oil under the machine or on the lift cylinder.
- Drift: the raised platform slowly creeps down on its own.
- Batteries that no longer last a full shift, or take much longer to charge.
- A fault code or flashing light on the controller.
- Grinding, squealing or clunking from the pump, wheels or scissor pins.
- The tilt alarm sounding on a level floor.
What to have ready when you call
A few details help us quote accurately and bring the right parts the first time:
- Make, model and serial number, found on the plate near the ground controls.
- The hour meter reading.
- Any fault code showing on the display.
- When the problem started and exactly what the lift does.
- Where the lift is, and whether it can be driven onto a trailer.
Annual ANSI/OSHA inspections are $225 at our Addison, IL shop. Repairs are billed at $150/hr; call 773-790-7299 to get on the schedule.
Regular service also protects resale value. A lift with a documented inspection history, clean hydraulics and healthy batteries is worth noticeably more when it is time to trade it in or sell it.
Shop or on-site?
If the lift can travel, bringing it to our Addison shop is usually the quickest and lowest-cost option, because every tool and the most common parts are right there. When a lift is in use on a job, or you have several machines in one building, an on-site visit keeps them where they are and saves the trailer time.
- Photos or a short video of the problem, if you can take them safely.
- The best contact on site and when to reach them.
Which scissor lift size do you need?
Match the lift to your ceiling and your narrowest doorway. Working height is roughly platform height plus 6 ft.
- 19 ft (Genie GS-1930, Skyjack SJIII3219): 25 ft working height, 30–32 in wide, so it rolls through a standard doorway. Good for ceilings, lighting and retail fit-outs.
- 26 ft (Genie GS-2632/GS-2646, Skyjack SJIII3226/SJIII4626): 32 ft working height in a 32 in or 46 in chassis. Warehouses, gyms, sprinkler and HVAC work.
- 32 ft (Genie GS-3232/GS-3246, Skyjack SJIII4632): 38 ft working height for high-bay warehouses and big-box stores.
- 40 ft (Genie GS-4047, Skyjack SJIII4740): 45 ft working height, 47 in wide, for tall distribution centers and atriums.
Not sure? Send us the ceiling height and the narrowest opening the lift has to pass through in Orland Park, and we will match the machine for you.
Orland Park scissor lift service FAQ
How fast can you get to Orland Park?
We’re about 28 miles away in Addison — usually same-day or next-morning pickup, and down machines get priority scheduling.
Do you service lifts I didn’t buy from you?
Yes — Genie, Skyjack, and JLG, wherever you got the machine. We’re an independent shop, not a rental chain that prioritizes its own fleet.
Is it cheaper than on-site repair?
Usually. Pickup and shop repair means no hourly meter running on a truck in your lot, the right parts on the shelf, and the machine tested before it comes back.
Nearby service areas: Tinley Park · Oak Lawn · all Chicagoland.
Get your Orland Park lift serviced: call 773-790-7299 (Mon–Fri 7am–3pm) or request service online.