WIN·WIN  /  SCISSOR LIFT SERVICE

SCISSOR LIFT SERVICE OAK PARK IL

If you’ve got a scissor lift down in Oak Park, we’ll get it back up.

Fully refurbished Skyjack SJ4740 40 ft

Win Win Equipment runs a full service shop in Addison, IL — about 30 minutes from Oak Park — and we service all major brands: Genie, Skyjack, JLG, and others. $150/hour labor plus parts. No shop fees. No diagnostic surcharges. Same-day estimate once the lift is in our shop.

[Call 773-790-7299] [Schedule a pickup]

WIN·WIN  /  SECTION

What we service for Oak Park customers

  • Hydraulic system repair — cylinder seals, hose replacement, fluid issues
  • Control box & electrical — joystick failures, wiring, e-stops
  • Battery & charger service — replacement, troubleshooting, charging system repair
  • Drive system — motor, brake, steering linkage
  • Annual ANSI/OSHA inspection — ANSI A92.20-2018 / OSHA 29 CFR 1926.453, with certificate
  • Full refurbishment — for older units that need more than a repair

Whether it’s a single lift down on a Oak Park jobsite or a fleet that needs a maintenance pass, we’re built for both.

WIN·WIN  /  SECTION

Pickup & delivery in Oak Park

We pick up scissor lifts from Oak Park and the rest of Cook County. Drive time from our Addison shop is roughly 30 minutes. Transport runs $75–$300 depending on distance and we always quote upfront.

If you can drop the lift at our yard yourself, pickup at the shop is free.

WIN·WIN  /  SECTION

Annual ANSI/OSHA inspection in Oak Park

OSHA 29 CFR 1926.453 requires an annual inspection of every aerial work platform by a qualified service technician. We do these every day:

  • At our shop: $225 per unit, typical 2–3 hour turnaround
  • On site in Oak Park: $350 per unit, scheduled by appointment

Documentation goes with the lift. If anything fails, we tell you what’s needed and quote the repair before doing the work.

Full ANSI/OSHA inspection details

WIN·WIN  /  SECTION

Battery replacement & charger rebuild

The most common service item on an electric slab lift is the battery pack. Symptoms:

  • Lift won’t reach full extension
  • Charger won’t complete a cycle
  • Daily run time is dropping noticeably

Replacement is straightforward — we typically install a fresh 24V flooded lead-acid set, properly water and load-test it, and verify the charger output cycle. Total parts + labor for a 4-battery set runs $1,200–$1,800 depending on lift size and battery brand.

Our refurbishment process

WIN·WIN  /  SECTION

Genie service in Oak Park

We’re Genie specialists. Whether it’s a GS-1930, GS-2632, GS-3246, or one of the larger GS-4047 platforms, we have parts and the troubleshooting experience to fix it right the first time.

Common Genie service items in our shop:

  • Pivot pin wear (the bushing kit is a known wear item)
  • Battery and charger
  • Hydraulic cylinder seals on older 5-generation units
  • Control box function switches

Genie scissor lift service →

WIN·WIN  /  SECTION

Skyjack service in Oak Park

Same standard for Skyjack. SJIII3219, SJIII3226, SJIII4632, SJIII4740, SJ4732, and the newer E-Drive platforms all come through our shop.

Common Skyjack service items:

  • Modular control box troubleshooting (Skyjack’s service-friendly design)
  • Battery and charger
  • Drive motor / brush replacement on older SJIII platforms
  • Hydraulic seal kits

Skyjack scissor lift service →

WIN·WIN  /  SECTION

Frequently asked questions

How fast can you pick up in Oak Park? Most Oak Park pickups land within 1–3 business days of the request. Emergency / same-week is often possible — call us.

Do you service brands besides Genie and Skyjack? Yes. JLG, Haulotte, MEC, and others. If your lift was made in the last 25 years, we’ve probably worked on one.

What does an annual inspection cost? $225 at our shop or $350 on-site in Oak Park. Includes the certificate.

Do you provide same-day estimates? Yes — once the lift is in our shop, we diagnose and quote the same day. We don’t start work until you approve the price.

What’s the warranty on repairs? We back our work with a service guarantee on the parts and labor we replace. Specifics depend on the repair — ask us.

Can I get a quote without bringing the lift in? We can give you a ballpark over the phone, but accurate quotes need eyes on the unit. That’s part of why we do same-day estimates after pickup.

WIN·WIN  /  SECTION

Other cities we serve nearby

WIN·WIN  /  SECTION

Schedule scissor lift service in Oak Park

Tell us what’s going on with the lift and where it is. We’ll set up pickup and have a same-day estimate once it lands at our shop.

[Call 773-790-7299] [Email Win Win Equipment] Schedule service →

Win Win Equipment

WIN·WIN  /  OAK PARK

Get a quote for Oak Park

Tell us what you need and where you need it. We’ll have a real number back to you the same business day.

CALL 773-790-7299  ·  GET A QUOTE  ·  RENTAL IN OAK PARK

Scissor lift service Oak Park — what’s included

Every scissor lift service Oak Park job at our Addison shop follows the same process: pickup, diagnostic, repair, and an updated ANSI A92.20 / OSHA aerial lift inspection certificate before the unit goes back to you. We’re certified on Genie, Skyjack, and JLG aerial work platforms.

Need parts, service, or a quote? Contact us or call 773-790-7299. While you’re here, check our refurbished scissor lifts for sale or scissor lift rental in Oak Park.

Schedule Your Service