We service and refurbish Genie GS-2632 scissor lifts in our shop in Addison, IL — 25 minutes outside of Chicago — and ship them anywhere in the continental U.S. in an enclosed trailer.

We sell the Genie GS-2632 at two price tiers so you can pick what fits your job and your budget. Fully Serviced starts at $8,000 — tested components, fresh ANSI/OSHA inspection, optional new parts à la carte. Fully Refurbished starts at $10,800 — new batteries, new tires, new charger, rebuilt control box, full hydraulic inspection, and a complete sand-down + repaint to factory-fresh.

Either way: shipped nationwide in an enclosed trailer.

Call 773-790-7299 for current units, lead time, and freight to your zip code.

[Call 773-790-7299] [Get a quote in 24 hours]

Two ways to buy: Fully Serviced or Fully Refurbished

Most refurb dealers sell one product. We sell two — because not every buyer needs the same thing, and every job has a different budget.

Fully Serviced — starts at $8,000

Tested components — drive, hydraulic, electrical, control system all functionally tested
New annual ANSI/OSHA inspection — A92.20-2018 / OSHA 29 CFR 1926.453 documented and current
Optional new parts à la carte — want fresh batteries but not a full repaint? Want new tires but not the rebuilt control box? Spec the unit to your budget. We’ll quote.

The Fully Serviced tier is the path that competes with auction-site used (IronPlanet, GovPlanet, Ritchie Bros). The difference: you can come see the lift in our Addison, IL shop — and we can add new parts at your direction. None of the auction sites can do either.

Fully Refurbished — starts at $10,800

Everything in Fully Serviced, plus:

New batteries. Fresh 24V flooded lead-acid pack, properly watered and load-tested.
New tires. Non-marking compound, indoor-grade.
New charger. Tested through a full charge cycle.
Rebuilt control box. Joystick, function switches, e-stops on platform and ground — all replaced where needed.
Hydraulic system inspected every time. Fluid tested and replaced only if outside spec.
Paint — done to order. Sanded down to bare metal, primed, repainted to factory-fresh, decals + ANSI markings replaced. Major separator vs other refurb dealers.

The Fully Refurbished tier is the premium path — half the cost of new with most of the reliability of new. What we built our reputation on.

What you’re getting

The GS-2632 steps up to a 26 ft platform with the same narrow 32-inch deck. Same agility as the GS-1930, more reach. Good for retail buildouts, ceiling work in distribution centers, and any job where you’re moving between aisles.

Specs at a glance

Spec	Value
Working height	32 ft
Platform height	26 ft
Platform size	32″ × 93″
Deck extension	3 ft
Capacity	500 lb (extended), 1000 lb (stowed)
Drive type	Electric
Power	24V DC
Stowed weight	~4,729 lb
Indoor/outdoor	Indoor primary; outdoor on smooth, level surfaces
Generation refurbed	5–6.5

Current inventory and lead time

GS-2632 inventory varies week to week. We typically have one or two units in some stage of work, plus units we can fast-track if you have a hard deadline.

Lead time is quick:

Already-finished, ready to ship: 1–2 weeks (freight only)
Fully Serviced from time of payment: typically 1–2 weeks
Fully Refurbished from time of payment: 3 weeks baseline

Call us — we’ll tell you exactly what’s in the shop, what stage each unit is at, and what we can promise on delivery.

See current scissor lift inventory →

Genie GS-2632 vs Skyjack SJIII3226

The Skyjack SJIII3226 is the closest equivalent. Same working height and platform width. Decision usually comes down to brand preference and what’s in stock the day you need to ship.

	Genie GS-2632	Skyjack SJIII3226
Working height	32 ft	similar
Platform width	32″	similar
Deck extension	3 ft	similar
Drive	Electric, 24V DC	Electric, 24V DC
Stowed weight	~4,729 lb	similar
Refurbished price	starts at $10,800	varies — call us

We sell both. We service both. If you want a real side-by-side, read our buyer’s guide or just call us.

When to buy a GS-2632 (vs. just renting one)

If you’ll use a 26 ft lift more than 90 days a year, buying probably wins.

A 26 ft class lift rents for around $190/day at our Chicagoland yard. Run that math against the refurb purchase price — somewhere in the 60–90 day mark, owning starts to crush rental on total cost.

Buying makes sense for:

Facility teams running a lift year-round
Multi-site contractors with steady 26 ft work
Distribution centers and warehouses that need a lift on standby

Renting still wins for:

Single short jobs
Heights you’re not sure about yet
Outdoor rough-terrain jobs (we don’t sell those — we’ll point you to a partner)

Buy vs rent calculator →

Financing

Refurbished GS-2632 deals usually land in the $200–$400 / month range on 48-month terms, depending on the unit and credit. Call us for a no-pressure conversation.

See financing options →

How we ship

We ship nationwide via 3rd-party carriers in enclosed trailers. Same trusted carriers we’ve used for 30+ years. We quote freight upfront — no surprise charges at the dock.

Pickup is free for any buyer who comes to our Addison, IL yard. Doesn’t matter where you’re driving from — pickup is on us.

Frequently asked questions

Is the GS-2632 still in production?
Yes. Genie still builds the GS-2632 — the platform is currently in its 7th generation (Next Gen). The most reliable units for refurbishment work are in the 5–6.5 generation range, and that’s what we predominantly sell.

How much does a refurbished GS-2632 weigh?
About 4,729 lb stowed. Floor-load matters for upper-floor work — measure your deck rating before you buy.

What’s the difference between Fully Serviced and Fully Refurbished?
Fully Serviced (starts at $8,000) gets you a tested, inspected lift with the option to spec new parts à la carte. Fully Refurbished (starts at $10,800) gets you new batteries, tires, charger, rebuilt control box, full hydraulic inspection, and a complete repaint — comprehensive, factory-fresh.

What batteries does it use?
A 24V DC battery pack, typically 4× 6V flooded lead-acid in series. Fresh batteries are included on every Fully Refurbished unit and available à la carte on Fully Serviced.

Will it fit through a standard 8 ft door?
Stowed height varies by year. Most commercial roll-up doors clear it; some narrower service doors don’t. Measure your door before you commit — or ask us.

What’s the warranty?
We back our refurbishment work with a service guarantee on the rebuilt components. Specifics depend on the unit and tier. Ask us about the one you’re considering.

Can I see the unit before I buy?
Yes. We send same-day video walk-arounds. If you’re in Chicagoland (or driving in from anywhere), you can come visit our shop in Addison and walk the yard.

How long until you can deliver?
1–2 weeks for ready-to-ship. 3 weeks from the time of payment as a baseline for Fully Refurbished work. Real numbers, not best-case fairy tales.

What’s included in the price?
The lift, all the work in your chosen tier, the inspection certificate, and the operator manual. Freight is quoted separately by zip code.

What customers say

Related models and resources

Skyjack SJIII3226 — the Skyjack equivalent
Our refurbishment process — exactly what we do to every lift
Scissor lift inventory — see what’s in stock right now
Scissor lift price guide — full pricing across both tiers and all sizes
Buy vs rent — when ownership wins

Get a quote on a GS-2632

Tell us what you’re working on and we’ll tell you what we have, what tier fits your budget, and what freight is to your zip code.

[Call 773-790-7299] [Email Win Win Equipment] Get a quote →

— Win Win Equipment