SCISSOR LIFT SERVICE BOLINGBROOK IL
If you’ve got a scissor lift down in Bolingbrook, we’ll get it back up. Bolingbrook sits where I-55 and I-355 meet, and it has become one of the Chicago area’s biggest warehouse and distribution towns. Huge buildings line Remington Boulevard, Joliet Road, Veterans Parkway and the I-55 frontage roads, handling e-commerce, retail and grocery freight. Ulta Beauty has its headquarters here, and the shops at The Promenade Bolingbrook and along Boughton Road add retail work on top of that.
What we service for Bolingbrook customers
- Hydraulic system repair — cylinder seals, hose replacement, fluid issues
- Control box & electrical — joystick failures, wiring, e-stops
- Battery & charger service — replacement, troubleshooting, charging system repair
- Drive system — motor, brake, steering linkage
- Annual ANSI/OSHA inspection — ANSI A92.20-2018 / OSHA 29 CFR 1926.453, with certificate
- Full refurbishment — for older units that need more than a repair
Whether it’s a single lift down on a Bolingbrook jobsite or a fleet that needs a maintenance pass, we’re built for both.
In buildings like these, scissor lifts are daily tools. They run every shift for racking checks, labels, lighting, sprinkler and conveyor work. Our Bolingbrook customers are mostly warehouses with several lifts, plus the general and electrical contractors and maintenance teams that keep those buildings running.
About 30 minutes down I-355
Our shop at 1750 W. Armitage Court in Addison is about 17 miles north of Bolingbrook, around 25–30 minutes straight down I-355 without traffic. That’s well inside our roughly 30-mile service area. We pick up and deliver Monday to Friday, 7am to 3pm. Transport is quoted per trip because fuel and driver costs change, and it usually starts around $150. If you haul your own lift to our shop, there’s no transport fee at all, and we’re glad when customers do.
Batteries: the first thing to go
In a busy DC, batteries usually wear out first. A weak set shows up as short run time, a charger that never finishes, or a lift that won’t reach full height. We replace them with 6-volt flooded deep-cycle batteries, wired together into the lift’s 24-volt system. We fill and load-test them, then make sure the charger completes a full cycle before the lift goes back. A full battery set installed on site runs about $1,200–$1,800, depending on the lift. Bringing the lift to our shop instead? Ask us for the in-shop price.
Fleet care, not just fixes
For Bolingbrook buildings with several lifts, we recommend a simple routine:
- One on-site inspection day a year for every machine ($350 per lift), so nothing leaves the building and all the due dates line up.
- Battery testing at the same visit.
- A call the first time you see oil on the floor. Hydraulic leaks only get more expensive.
- A stand-in lift if you need one. If a machine has to come to our shop, we can usually leave a rental lift in its place until it’s back.
Single lifts can be inspected at our shop for $225. Repairs are $150/hr plus parts, approved by you before work starts. Warehouse fleets are often mixed (a few Genies, a few Skyjacks, a JLG that came with the building), and we work on all of them.
Annual ANSI/OSHA inspection in Bolingbrook
OSHA 29 CFR 1926.453 requires an annual inspection of every aerial work platform by a qualified service technician. We do these every day:
- At our shop: $225 per unit, typical 2–3 hour turnaround
- On site in Bolingbrook: $350 per unit, scheduled by appointment
Documentation goes with the lift. If anything fails, we tell you what’s needed and quote the repair before doing the work.
Full ANSI/OSHA inspection details
Genie service in Bolingbrook
We’re Genie specialists. Whether it’s a GS-1930, GS-2632, GS-3246, or one of the larger GS-4047 platforms, we have parts and the troubleshooting experience to fix it right the first time.
Common Genie service items in our shop:
- Pivot pin wear (the bushing kit is a known wear item)
- Battery and charger
- Hydraulic cylinder seals on older 5-generation units
- Control box function switches
Skyjack service in Bolingbrook
Same standard for Skyjack. SJIII3219, SJIII3226, SJIII4632, SJIII4740, SJ4732, and the newer E-Drive platforms all come through our shop.
Common Skyjack service items:
- Modular control box troubleshooting (Skyjack’s service-friendly design)
- Battery and charger
- Drive motor / brush replacement on older SJIII platforms
- Hydraulic seal kits
Skyjack scissor lift service →
Frequently asked questions
How fast can you pick up in Bolingbrook? Most Bolingbrook pickups land within 1–3 business days of the request. Emergency / same-week is often possible — call us.
Do you service brands besides Genie and Skyjack? Yes. JLG, Haulotte, MEC, and others. If your lift was made in the last 25 years, we’ve probably worked on one.
What does an annual inspection cost? $225 at our shop or $350 on-site in Bolingbrook. Includes the certificate.
Do you provide same-day estimates? Yes — once the lift is in our shop, we diagnose and quote the same day. We don’t start work until you approve the price.
What’s the warranty on repairs? We back our work with a service guarantee on the parts and labor we replace. Specifics depend on the repair — ask us.
Can I get a quote without bringing the lift in? We can give you a ballpark over the phone, but accurate quotes need eyes on the unit. That’s part of why we do same-day estimates after pickup.
Other cities we serve nearby
- Scissor lift rental in Naperville · service
- Scissor lift rental in Joliet · service
- Scissor lift rental in Aurora · service
- Scissor lift rental in Downers Grove · service
Schedule scissor lift service in Bolingbrook
Tell us what’s going on with the lift and where it is. We’ll set up pickup and have a same-day estimate once it lands at our shop.
Call 773-790-7299 Email Win Win Equipment Schedule service →
— Win Win Equipment
Get a quote for Bolingbrook
Tell us what you need and where you need it. We’ll have a real number back to you the same business day.
Scissor lift service Bolingbrook — what’s included
Every scissor lift service Bolingbrook job at our Addison shop follows the same process: pickup, diagnostic, repair, and an updated ANSI A92.20 / OSHA aerial lift inspection certificate before the unit goes back to you.
Need parts, service, or a quote? Contact us or call 773-790-7299. While you’re here, check our refurbished scissor lifts for sale or scissor lift rental in Bolingbrook.