Win Win Equipment runs a full service shop in Addison, IL — about 20 minutes from Arlington Heights — and we service all major brands: Genie, Skyjack, JLG, and others. $150/hour labor plus parts. No shop fees. No diagnostic surcharges. Same-day estimate once the lift is in our shop.

[Call 773-790-7299] [Schedule a pickup]

• Hydraulic system repair — cylinder seals, hose replacement, fluid issues
• Control box & electrical — joystick failures, wiring, e-stops
• Battery & charger service — replacement, troubleshooting, charging system repair
• Drive system — motor, brake, steering linkage
• Annual ANSI/OSHA inspection — ANSI A92.20-2018 / OSHA 29 CFR 1926.453, with certificate
• Full refurbishment — for older units that need more than a repair

Whether it’s a single lift down on a Arlington Heights jobsite or a fleet that needs a maintenance pass, we’re built for both.

We pick up scissor lifts from Arlington Heights and the rest of Cook County. Drive time from our Addison shop is roughly 20 minutes. Transport runs $75–$300 depending on distance and we always quote upfront.

If you can drop the lift at our yard yourself, pickup at the shop is free.

OSHA 29 CFR 1926.453 requires an annual inspection of every aerial work platform by a qualified service technician. We do these every day:

• At our shop: $225 per unit, typical 2–3 hour turnaround
• On site in Arlington Heights: $350 per unit, scheduled by appointment

Documentation goes with the lift. If anything fails, we tell you what’s needed and quote the repair before doing the work.

Full ANSI/OSHA inspection details

The most common service item on an electric slab lift is the battery pack. Symptoms:

• Lift won’t reach full extension
• Charger won’t complete a cycle
• Daily run time is dropping noticeably

Replacement is straightforward — we typically install a fresh 24V flooded lead-acid set, properly water and load-test it, and verify the charger output cycle. Total parts + labor for a 4-battery set runs $1,200–$1,800 depending on lift size and battery brand.

Our refurbishment process

We’re Genie specialists. Whether it’s a GS-1930, GS-2632, GS-3246, or one of the larger GS-4047 platforms, we have parts and the troubleshooting experience to fix it right the first time.

Common Genie service items in our shop:

• Pivot pin wear (the bushing kit is a known wear item)
• Battery and charger
• Hydraulic cylinder seals on older 5-generation units
• Control box function switches

Genie scissor lift service →

Same standard for Skyjack. SJIII3219, SJIII3226, SJIII4632, SJIII4740, SJ4732, and the newer E-Drive platforms all come through our shop.

Common Skyjack service items:

• Modular control box troubleshooting (Skyjack’s service-friendly design)
• Battery and charger
• Drive motor / brush replacement on older SJIII platforms
• Hydraulic seal kits

Skyjack scissor lift service →

How fast can you pick up in Arlington Heights? Most Arlington Heights pickups land within 1–3 business days of the request. Emergency / same-week is often possible — call us.

Do you service brands besides Genie and Skyjack? Yes. JLG, Haulotte, MEC, and others. If your lift was made in the last 25 years, we’ve probably worked on one.

What does an annual inspection cost? $225 at our shop or $350 on-site in Arlington Heights. Includes the certificate.

Do you provide same-day estimates? Yes — once the lift is in our shop, we diagnose and quote the same day. We don’t start work until you approve the price.

What’s the warranty on repairs? We back our work with a service guarantee on the parts and labor we replace. Specifics depend on the repair — ask us.

Can I get a quote without bringing the lift in? We can give you a ballpark over the phone, but accurate quotes need eyes on the unit. That’s part of why we do same-day estimates after pickup.

• Scissor lift rental in Mount Prospect · service
• Scissor lift rental in Palatine · service
• Scissor lift rental in Rolling Meadows · service
• Scissor lift rental in Buffalo Grove · service

Tell us what’s going on with the lift and where it is. We’ll set up pickup and have a same-day estimate once it lands at our shop.

[Call 773-790-7299] [Email Win Win Equipment] Schedule service →

— Win Win Equipment