$8,900.00
This 2015 fully refurbished Skyjack SJIII3219 electric scissor lift is a compact indoor access solution commonly used for electrical work, facility maintenance, warehouses, and commercial interiors. Each unit is refurbished to order by Win Win Equipment to provide dependable performance and long-term reliability.
The Skyjack SJIII3219 has built its reputation on simplicity, durability, and no-nonsense performance. Thousands of these machines operate daily across North America in every type of commercial building — from office towers and shopping centers to distribution warehouses and manufacturing plants. The 19-foot platform height handles the vast majority of standard ceiling-height work, while the 32-inch narrow body passes through single doorways without removing rails.
What sets the Skyjack SJIII series apart is its straightforward mechanical design. Fewer electronic components mean fewer points of failure, lower repair costs, and easier troubleshooting in the field. For fleet operators and rental companies, this translates directly to higher uptime and lower total cost of ownership over the life of the machine.
A 2015 Skyjack SJIII3219 refurbished by Win Win Equipment offers years of additional productive service at a fraction of the cost of new equipment. Our Addison, Illinois team inspects and rebuilds all critical systems — drive motors, controllers, hydraulic cylinders, batteries, tires, and safety devices — to restore reliable operation and extend the machine’s working life.
All refurbished equipment is completed to order with a typical lead time of 2–3 weeks from the time of payment. If you require equipment sooner, please contact Win Win Equipment to discuss expedited lead times or available machines that may already be ready to ship.
This Skyjack SJIII3219 is fully refurbished to order at our facility in Addison, Illinois, and prepared for jobsite-ready use prior to delivery. Each refurbishment focuses on safe operation, mechanical reliability, and consistent electrical performance.
All refurbishment work is completed by our in-house technicians in Addison, IL. Additional refurbishment details and available options can be found on our full refurbishment program.
Standard refurbishment lead time is approximately 2–3 weeks from payment. Expedited timelines or alternate equipment options may be available upon request.
Relay based control system
Color coded and numbered wiring system
Telematics ready
The Skyjack SJIII3219 is a widely used 19-foot electric scissor lift designed for indoor environments where maneuverability and compact size are important. Its narrow frame and simple design make it a strong choice for contractors and facilities working in tight interior spaces.
Work Height – 25’ (7.62 m)
Raised Platform Height – 19’ (5.79 m)
Lowered Platform Height – 39” (0.99 m)
Overall Width – 32” (0.81 m)
Overall Length – 70” (1.78 m)
Stowed Height (Rails Up) – 78.5” (1.99 m)
Stowed Height (Rails Down) – OPT 64.5” (1.64 m)
Platform Width (Inside Dimension) – 26” (0.66 m)
Platform Length (Inside Dimension) – 64” (1.63 m)
Extension Deck (Roll Out) – 3’ (0.91 m)
Ground Clearance (Stowed) – 2.375” (6.03 cm)
Ground Clearance (raised) – 0.7” (1.78 cm)
Wheelbase – 55” (1.40 m)
Weight – 2,580 lbs (1,170 kg)
Gradeability – 30%
Turning Radius (Inside) – 0
Turning Radius (Outside) – 66” (1.68 m)
Lift Time (With Rated Load) – 25 sec
Lower Time (With Rated Load) – 29 sec
Drive Speed (Stowed) – 2 mph (3.2 km/h)
Drive Speed (Raised) – 0.7 mph (1.1 km/h)
Maximum Drive Height – Full Height
Capacity (Overall) – 550 lbs (249 kg)
Distributed Capacity (Main Platform) – 300 lbs (136 kg)
Distributed Capacity (Extension Deck) – 250 lbs (113 kg)
Local Floor Load (With Rated Load) – 110 psi (759 kPa)
Overall Floor Load (With Rated Load) – 201 psf (10 kPa)
Maximum # of Persons – 2
Wind Rating – 28 mph (12.5 m/s)
Tire Type – Solid, N/M
Tire Size – 12 x 4 x 8
This Skyjack SJIII3219 is fully refurbished to order at our facility in Addison, Illinois, and prepared for jobsite-ready use prior to delivery. Each refurbishment focuses on safe operation, mechanical reliability, and consistent electrical performance.
All refurbishment work is completed by our in-house technicians in Addison, IL. Additional refurbishment details and available options can be found on our full refurbishment program.
Standard refurbishment lead time is approximately 2–3 weeks from payment. Expedited timelines or alternate equipment options may be available upon request.
New batteries
New battery charger
New paint & decals
New tires
<ul>
<li><strong>Year:</strong> 2015 or newer</li>
<li><strong>Condition:</strong> Fully Refurbished</li>
<li><strong>Refurbishment Type:</strong> Refurbished to Order</li>
</ul>
